- Built-in 12V Hot Plug Power IC with eFuse protection circuit
- Built-in U.2(SFF-8639) Male connector
- Built-in Gen-Z(EDSFF) 1C Connector
- Supports SMB_CLK/ SMB_DATA
- Supports PWRDIS
- Supports DualPortEn
- LED1 RED LED Blinking indicates Gen-Z SSD active status
- LED2 GREEN indicates 12V Power Ready
- LED3 GREEN indicates 3.3Vaux Power Ready
- JP1 pin header must be to setup on, when Host does not supply 3.3Vaux
